Cable Flexing Tester

Product description:

This tester is designed by the two committees according to the current needs of the international market. It is a new type of integrated detection instrument for special soft wires. This instrument has a novel appearance design, reliable performance and structure, convenient operation, and can be used for both machines. The high accuracy of test data makes it an ideal testing instrument in the current market. It is suitable for measuring the mechanical strength of PVC insulated cables or rubber insulated and extra flexible wires with a rated voltage below 450/750V and two or more cores. Not suitable for flexible cables with a nominal cross-sectional area greater than 4mm² and concentric gluing of more than 2 layers and more than 18 glued cores.

Standards:

• IEC 60227:2007

• IEC 60245-2003

Technical parameters:

• Test specimen type: two-core single-phase, three-phase three-wire, three-phase four-wire

• Test method: no-load, single-phase (two-core), three-phase (three-phase three-wire/three-phase four-wire)

• Determination method of the test result:

A: Indication: O, R, S, T, Phase line broken and stop automatically

B: Indication: R/S, R/T, S/T/R/O, S/O, T/O, short-circuit and stop automatically

C: Indication: O, R, S, T, pulley short-circuit and stop automatically

• Winding speed: Two-pulley: 0.33 m/s, three-pulley: 0.1m/s

• Winding travel: ≥1000mm

• Testing current: 0.5~35A

• Testing voltage: single-phase AC 0~250V, three-phase AC:0~400V

• Heavy hammer: Two-pulley: 0.5kg, 1.0 kg, 2.0 kg, 3.0 kg, 4.0 kg, each two of them. Three-pulley: 21N, 28N, 42N, each two of them

• Pulley structure: The trolley is the two-pulley and three-pulley

 sharing structure, which is easy to replace

• Two-pulley: Φ80, Φ120, Φ160, Φ200mm, each two of them

• Three-pulley: Φ 40, Φ 45, Φ50mm, each three of them

Specifications:

• Overall dimensions: 2100mm×850mm×1500mm

• Power supply: AC 380V 50/60Hz 10A