Tig welding

This device is used for high-quality cutting and welding of long strips of aluminum, copper, and steel. The device performs continuous welding of cleaned copper and aluminum strips after trimming them at a 60-degree angle and aligning the trim, allowing for continuous production.

1. Main technical parameters:

Strip width: 15～200mm; Strip thickness: Copper strip: 0.3～0.8mm; Aluminum strip: 0.5～1.2mm; The gap of the precise cutting knives is adjustable, and the knives can be sharpened again. One-sided adjustment of seam clamping is possible, convenient adjustment of joint gap, and straightness of copper and aluminum strips.

Welding speed: 0.5～2.0m/mm, continuously adjustable; Welding method: argon arc welding; Welding current: 10-160A, continuously adjustable; The equipment is convenient to operate. After welding, the tensile strength and elongation at break are not less than 85% of the same parameters of the original strip.